Technical resources

13 documents for engineers, safety officers, and procurement: safety data sheets, product data, application specifications, and test reports, free to download.

Request a Project Assessment Call 936-208-9076

Documents

These carry the manufacturer's branding. Each safety data sheet covers only the product it names, and the client has confirmed the dates shown are current.

Safety data sheets

Top-Seal White safety data sheet (PDF, 266 KB , 2020, current) Hazards, handling and storage, exposure controls, and transport.
Top-Seal Black safety data sheet (PDF, 225 KB , 2016, current) Hazards, handling and storage, exposure controls, and transport.

Product data

Top-Seal White specification sheet (PDF, 303 KB ) Physical properties, pH, density, and guaranteed minimum solids content.
Top-Seal Black product data (PDF, 609 KB ) Wearing surface and cold in-place recycling applications.
Terra Prime product data (PDF, 744 KB ) Trial history against MC-30 and the typical application rate.
Terra Fog product data (PDF, 571 KB ) Dilution range, surface preparation, and minimum application temperature.

Application specifications

Stabilization application specification (PDF, 3.4 MB ) Equipment by finish level, rates by soil and lift depth, and the full procedure.
Dust control application specification (PDF, 410 KB ) Topical dust control with Top-Seal White.
Landfill application procedures (PDF, 269 KB ) Covers and liners: dilution, passes, and compaction.
Haul road program (PDF, 320 KB ) Top-Seal White on haul roads.

Testing and engineering

Landfill composite liner and cover drawing (PDF, 559 KB ) Where Top-Seal White fits in a liner and cover system, with the Holt Engineering permeability results.
California Bearing Ratio testing, Texas crushed limestone base (PDF, 255 KB ) CBR test report on a treated crushed limestone base.
University of Texas at Austin polymer stabilization study (PDF, 427 KB ) Research on polymer stabilized bases compared with soil-cement.

Not yet available: no safety data sheet for Terra Prime or Terra Fog has been supplied to us. Ask for it before any application; we do not substitute another product's sheet.

Test results

Holt Engineering tested soil untreated and treated with Top-Seal White. These are reported results on specific samples, published with their sources.

Unconfined compressive strength (PSI)
Sample	Scale	PSI
Untreated soil		132
Top-Seal White, medium strength		1,400
Top-Seal White, high strength		2,200

Source: Holt Engineering compressive strength testing, as reported in the product line's engineering presentation.

Permeability coefficient
Sample	Coefficient
EPA reference standard	1.00E-07
Top-Seal White, medium strength	3.20E-08
Top-Seal White, high strength	1.00E-09

A lower coefficient means the soil lets less water through. The EPA reference standard is shown for comparison. Source: Holt Engineering permeability testing, Austin, Texas, January 8 2018, as reported in the landfill composite liner drawing.

Need a document for a specific application?

Tell us the application and we will point you to the documents that belong to it, and the rate that goes with that use rather than a general figure.

Request a Project Assessment

936-208-9076
info@solidearthsolutions.com

We reply within 24 to 48 hours.